Office of Education and Data Management Career Development Handouts for 2019

Documents/Forms

Career Development Handouts 2019

Fall Semester

September -
NFIRS-A Review of the Rules for the Basic Module/DJ Zordan, Instructor
(two slides per page)

September - Residential Code Series:  Structural/Greg Grew, Instructor
(two slides per page)

Residential - Structural 2015 - IRC Plan Review/Greg Grew, Instructor
OEDM Fall 2019 Career Development House Plans/Greg Grew, Instructor

October - Residential Code Series:  Electrical and Photovoltaic/Michael Ose, Instructor
(two slides per page)

Existing Building Code - Focus on Performance/Jim Quish, Instructor
(two slides per page)

November - Residential Code Series: Plumbing, Mechanical and Radon/Bill Lussier, Instructor
(two slides per page)
 

Fire Investigation Origin and Cause Report Writing/Paul Makuc, Instructor
No handouts

December - Residential Code Series - Building Exteriors and Energy/Mike DeWein, Instructor
(two slides per page)

Residential Plan Review Checklist Generic CT IECC - Building Exteriors and Energy
Documentation for Enclosure Code Compliance CT - Building Exteriors and Energy

Pre-Incident Planning for Fire Marshals/Michael Spaziani, Instructor
No handouts

*******

Spring Semester

January - Tall Wood Buildings for Local Code Officials/Ray Walker, Instructor
(two slides per page)

January - Means of Egress, with Mixed Occupancies and Signage/Roger Martin, Instructor
(two slides per page)

February - Energy Code Compliance and Documentation/Fred Wajcs, Instructor
(two slides per page)

February - Improvised Explosives Continuing Education Class 1/Joseph T. Lombardi, Instructor
"no handouts"

March - Motor Fuel-Dispensing Facilities Mar 19a/John Doucette and Chuck Kiessling, Instructors
(two slides per page)

March - Focus on Height and Area/Don Vigneau, Instructor
(two slides per page)

April - Hazardous Occupancies/Ignatius Kapalczynski, Instructor
(two slides per page)

April - Assembly Use and Occupancies Requirements/Greg Grew, Instructor
(two slides per page)

May - Risk Categories and Structural Design Criteria - PE Metal Buildings/Tom DiBlasi, Instructor
(two slides per page)

May - Commercial Cooking and Grease-Laden Exhaust/Mike Sinsigalli, Instructor
(two slides per page)

June - Significant Changes to the CT Mechanical and Plumbing Codes/John Tye, Instructor
(two slides per page)