Are you sure you want to log out of your account? If you do want to logout, please click "Logout".
Exit Renumbering
Interactive Map
Frequently Asked Questions (FAQs)
Exit numbers will be determined based on the mileage contained in the CTDOT Linear Referencing System. Mileage typically runs from south to north and west to east.
No Exit 0
Mileage 0.00 - 1.49 = Exit 1
Mileage 1.50 - 2.99 = Exit 2
Mileage 3.00 – 3.99 and beyond.
+ Round down to the nearest whole mile
CTDOT may round up or down to the next nearest whole mile to reduce suffix letters or utilize the existing exit number.
Splits on off-ramps will not be designated as separate numbers/suffix letters.
All inquiries relating to exit numbering should be sent to DOT.TrafficEngineering@ct.gov with the subject line Exit Numbering.
The exit numbers will be revised as a component of corridor sign replacement projects. These projects are typically paid for by a mixture of State and Federal funds. The renumbering component of the project makes up about 2-5% of the total project construction cost.
“OLD EXIT” signs will be installed and remain in place typically for a minimum of 2 years, providing businesses with time to adjust to the new exit numbers and update advertising materials.
National Uniformity
Same exit numbering system as almost every other state
Driver friendly navigation
Allows drivers to quickly determine distances to destinations
Easier to calculate miles traveled
More accurate emergency response
Improves reporting of highway incidents, resulting in better navigation of emergency services
Easier to add future exits without renumbering entire corridor
CTDOT issues a press release during the design phase of each corridor sign replacement project. CTDOT then reaches out to the highest elected official in each of the municipalities directly impacted by the numbering change and provides a link to the press release which contains the future numbering. This communication allows municipalities to inform local business and emergency services of the upcoming change.
As construction commences, CTDOT will publish another press release relating to the project. At least two (2) weeks prior to the renumbering occurring, portable changeable message signs will be installed notifying drivers of the upcoming revision. As the numbers are revised, the “OLD EXIT” numbers will be posted at select locations throughout the corridor, typically for 2 years. The changeover takes about 1-6 weeks per route depending on the length of the route and the complexity with revising the numbers, such as the quantity of overhead vs side mounted signs.
CTDOT will coordinate the changes with the various GPS companies (Waze, Apple, Google, Garmin, etc).
Exit sign panels will look the same, just the numbers themselves will change. “OLD EXIT” signs will typically have a yellow background with black lettering and will be installed at key locations for a minimum of 2 years. ”OLD EXIT” signs on the Merritt Parkway will have a green background with white lettering.
The images at the end of this document are examples of what you can expect to see after the numbers have been revised in future projects. The “OLD EXIT” signs will be removed approximately 2 years after installation. Actual installation may be slightly different as adjustments may be needed during field installation.
New exit numbers will be provided when signs are replaced in corridor sign projects. Projects are programmed based on need when signs reach or exceed their useful service life. The list below includes major routes only and the year is the approximate construction completion year. Please note that the schedule is subject to change.
CT-2: January 7, 2025
CT-8: Completed 2024
CT-9: Completed 2023
CT-15: 2025
I-84: 2026
I-91: 2027
I-95: 2028
I-291: 2025
I-384: Completed 2024
I-395: Completed 2015
I-691: Completed 2023
All limited access roadways within the State will be renumbered to mileage-based numbering as required by the Federal Highway Administration (FHWA).
No. The Federal Highway Administration allows Exit 0 but does not require its use. CTDOT has decided not to use Exit 0 to reduce potential confusion.
We anticipate minimal impact to traffic during construction. The public will be notified in advance of construction start and CTDOT will use electronic changeable message signs to alert motorists of lane closures during construction.
