Heating Contractor - Equivalent Out of State License
Review the scope of work for available license types for Heating, Piping and Cooling, Sheet Metal Work, or Hearth Product Work to determine the proper license to apply for.
An equivalent out of state license is one that required the same number of classroom hours, equivalent classroom curriculum, and on job training hours as the license type you are applying for.
Example: For your out of state license to be equivalent to the Connecticut S-1 license, your out of state license must have required 576 classroom hours and 12,000 hours of the job training to obtain.
REFER TO THE CHART BELOW FOR HOURS REQUIRED
|
License Type |
Scope of Work |
On the Job Training Hours |
Classroom Hours |
|
S-1 |
Unlimited Heating, Piping, and Cooling |
8,000 + 2 years (4,000) = 12,000 |
576 |
|
S-3 |
Limited Heating, Piping |
8,000 + 2 years (4,000) = 12,000 |
576 |
|
S-7 |
Limited Heating |
8,000 + 2 years (4,000) = 12,000 |
576 |
|
S-9 |
Limited Heating Cooling |
6,000 + 2 years (4,000) = 10,000 |
576 |
|
B-1 |
Limited Gas and Oil Burner |
2,000 + 2 years (4,000) = 6,000 |
288 |
|
B-3 |
Limited Gas and Oil |
4,000 + 2 years (4,000) = 8,000 |
360 |
|
D-1 |
Limited Warm Air, Air Conditioning and Refrigeration System |
4,000 + 2 years (4,000) = 8,000 |
432 |
|
D-3 |
Limited Cooling & Refrigeration |
4,000 + 2 years (4,000) = 8,000 |
396 |
|
G-1 |
Limited Heating, Piping & Cooling |
1, 000 + 2 years (4,000) = 5,000 |
*** |
|
G-9 |
Limited Welding |
1,000 + 2 years (4,000) = 5,000 |
*** |
|
SM-1 |
Sheet Metal |
8,000 + 2 years (4,000) = 12,000 |
576 |
|
SM-3 |
Limited Sheet Metal Residential/Light Commercial |
4,000 + 2 years (4,000) = 8,000 |
288 |
|
SM-5 |
Limited Sheet Metal Hood Systems |
2,000 + 2 years (4,000) = 6,000 |
144 |
|
ST-1 |
Solar Thermal |
4,000 + 2 years (4,000) = 8,000 |
288 |
|
VT-1 |
Limited Heating Cooling |
6,000 + 2 years (4,000) = 10,000 |
*** |
|
MT-1 |
Limited Heating Cooling |
6,000 + 2 years (4,000) = 10,000 |
*** |
|
HPG-1 |
Limited Heating Cooling (Gas Hearth) |
500 + 2 years (4,000) = 4,500 |
*** |
|
PP-1 |
Limited Process Piping |
2,000 + 2 years (4,000) = 8,000 |
*** |
IMPORTANT NOTES:
- Classroom hours must be equivalent to classes listed in EXHIBIT A– REQUIRED COURSES FOR HEATING, COOLING & SHEET METAL, HEARTH PRODUCT AND FUEL GAS LICENSE TYPES.
If you meet the equivalent out of state license requirement, choose ONE OUT OF STATE LICENSE ONLY and submit the following documents:
- Copy of the license
- License verification
- Laws and regulations that include the requirements met for you to obtain this license
- Scope of work for this license
DO NOT SUBMIT DOCUMENTS FOR MORE THAN ONE OUT OF STATE LICENSE. ONLY ONE LICENSE WILL BE REVEIWED FOR EQUIVALENCY.
IF YOU CANNOT PROVE THAT YOU HOLD AN EQUIVALENT OUT OF STATE LICENSE, YOUR APPLICATION WILL NOT BE APPROVED BASED ON THIS REQUIREMENT.
APPLICATION FEES ARE NONREFUNDABLE.
NEW APPLICATION:
OR Contractor Paper Application
Renewal, Reinstatement, & CE Information
Email Address: dcp.occupationalprofessional@ct.gov