Heating, Cooling & Sheet Metal, Hearth Product & Fuel Gas Work Journeyperson - Equivalent Experience and Training
Refer to Scope of Work for available license types for Heating, Piping and Cooling; Sheet Metal Work; or Hearth Product Work to determine what best covers the services you intend to provide.
To meet the Equivalent Experience and Training requirement, you must be able to prove that you complete the number of classroom hours AND on the job training hours for the license type you are applying for.
Example: If you are applying for the S-2 license, proof of 576 classroom hours AND 8,000 hours of on the job training is required.
REFER TO THE CHART BELOW FOR HOURS REQUIRED:
|
License Type |
Scope of Work |
On the Job Training Hours |
Classroom Hours |
|
S-2 |
Unlimited Heating, Piping, and Cooling |
8,000 |
576 |
|
S-4 |
Limited Heating & Piping |
8,000 |
576 |
|
S-8 |
Limited Heating |
8,000 |
576 |
|
S-10 |
Limited Heating Cooling |
6,000 |
576 |
|
B-2 |
Limited Gas and Oil Burner |
2,000 |
288 |
|
B-4 |
Limited Gas and Oil |
4,000 |
360 |
|
D-2 |
Limited Warm Air, Air Conditioning and Refrigeration System |
4,000 |
432 |
|
D-4 |
Limited Cooling Refrigeration |
4,000 |
396 |
|
G-2 |
Limited Heating, Piping and Cooling |
1,000 |
*** |
|
G-8 |
Limited Welding |
1,000 |
*** |
|
SM-2 |
Sheet Metal |
8,000 |
576 |
|
SM-4 |
Limited Sheet Metal Residential/Light Commercial |
4,000 |
288 |
|
SM-6 |
Limited Sheet Metal Hood Systems |
2,000 |
144 |
|
ST-2 |
Solar Thermal |
4,000 |
288 |
|
VT-2 |
Limited Heating Cooling |
6,000 |
*** |
|
MT-2 |
Limited Heating Cooling |
6,000 |
*** |
|
HPG-2 |
Limited Cooling |
500 |
*** |
| OE-2 | Operating Stationary Engineer | 6,000 |
432 |
| PP-2 | Limited Process Piping | 2,000 | *** |
For additional information regarding these requirements, please visit the CT Dept. of Labor Apprenticeship Division website: https://www.ctdol.state.ct.us/progsupt/appren/WorkSchedules/apptoc1.htm
For additional information on required on the job training hours and related instruction, visit the Dept. of Labor Apprenticeship Division website at www.ctdol.state.ct.us/progsupt/appren/appren.htm
eRegulations - Browse Regulations of Connecticut State Agencies
IMPORTANT NOTES:
- Classroom hours MUST be equivalent to classes listed in EXHIBIT A – REQUIRED COURSES FOR HEATING, COOLING & SHEET METAL, HEARTH PRODUCT AND FUEL GAS LICENSE TYPES.
- Continuing education certificates and manufacturer certificates do not meet these criteria and will not be considered.
- Degrees earned/classes completed that are not equivalent do not meet these criteria and will not be considered.
- Classroom hours are required. On the job training and work experience will not be considered in lieu of the classroom requirement.
If you meet the equivalent classroom hours, curriculum, and on the job training requirement, submit the following documents:
- Transcripts, degrees, and diplomas.
NOTE: Classroom hours must equal the same number of hours AND have an equivalent curriculum and course content as those listed in EXHIBIT A.
2. Notarized letters from current or previous employers.
NOTE: These letters must include dates of employment as well as a specific,
detailed description of work experiences including all aspects of the scope of work.
NOTE: Payroll records, W-2’s, or tax returns will not be accepted.
NOTE: Letters MUST be notarized. Letters that are not notarized will not be accepted.
3. Out of state completion certificate, if applicable include completion certificate
and documentation including classroom and on the job training hours required to complete
apprenticeship.
IF YOU CANNOT PROVE THAT YOU COMPLETED THE REQUIRED NUMBER OF CLASSROOM HOURS,
CURRICULUM, AND ON THE JOB TRAINING, YOUR APPLICATION WILL NOT BE APPROVED BASED
ON THIS REQUIREMENT.
APPLICATION FEES ARE NONREFUNDABLE.
NEW APPLICATION
DCP.occupationalprofessional@ct.gov