Heating, Piping and Cooling License Types and Scope of Work
B-1 LIMITED GAS AND OIL BURNER CONTRACTOR
The holder of this limited license may perform only the installation, repair, replacement, alteration, and maintenance of gas or oil burners for domestic and light commercial installations. A domestic or light commercial burner shall be considered as one consuming five gallons or less per hour or for systems with a total heating load not exceeding 500,000 BTU’s. This license permits the piping for petroleum-based fuels, alternate fuels including tanks and related equipment, LP gas supplied by gas containers and/or natural gas piping, approved gas applications, gas utilization equipment and accessories.
This limited license shall include “sheet metal” work as it pertains to the limitations of this credential.
Requirements to qualify for this exam shall be two (2) years as a properly licensed journeyperson or equivalent experience and training.
B-2 LIMITED GAS AND OIL BURNER JOURNEYPERSON
The holder of this limited license may perform only the installation, repair, replacement, alteration, and maintenance of gas or oil burners for domestic and light commercial installations. A domestic or light commercial burner shall be considered as one consuming five gallons or less per hour or for systems with a total heating load not exceeding 500,000 BTU’s. This license permits the piping for petroleum-based fuels, alternate fuels including tanks and related equipment, LP gas supplied by gas containers and/or natural gas piping, approved gas applications, gas utilization equipment and accessories.
This limited license shall include “sheet metal” work as it pertains to the limitations of this credential.
Requirements to qualify for the license examination shall be completion of a registered apprenticeship program or equivalent experience and training.
B-3 LIMITED GAS AND OIL BURNER CONTRACTOR
The holder of this license may perform the installing, servicing and repairing of any gas or oil fired burners. The requirements to qualify for this license examination shall be two (2) years as a properly licensed journeyperson or equivalent experience and training.
B-4 LIMITED GAS AND OIL BURNER JOURNEYPERSON
The holder of this license may perform the installing, servicing and repairing of any gas or oil fired burner and only while in the employ of a contractor licensed for such work. The requirements to qualify for this license examination shall be the completion of a registered apprenticeship program or equivalent experience and training.
D-1 LIMITED WARM AIR, AIR CONDITIONING AND REFRIGERATION CONTRACTOR
The holder of this license may perform the installation, repair, replacement, maintenance or alteration of any warm air, air conditioning and refrigeration system, including necessary piping for the conveyance of heating or cooling media and associated pumping equipment. This license does not including the installation or servicing of oil burners of any size. The requirements to qualify for this license examination shall be two (2) years as a properly licensed journeyperson or equivalent experience and training.
D-2 LIMITED WARM AIR, AIR CONDITIONING AND REFRIGERATION JOURNEYPERSON
The holder of this license may perform the installation, repair, replacement, maintenance or alteration of any warm air, air conditioning and refrigeration system, including necessary piping for the conveyance of heating or cooling media and associated pumping equipment, and only while in the employ of a contractor licensed for such work. This license does not including the installation or servicing of oil burners of any size. The requirements to qualify for this license examination shall be the completion of a registered apprenticeship program or equivalent experience and training.
D-3 LIMITED COOLING CONTRACTOR LICENSE
The holder of this license may perform the installation, repair, replacement, maintenance or alteration of all refrigeration systems included in food storage, air conditioning, or special process systems. The requirements to qualify for this license examination shall be two (2) years as a properly licensed journeyperson or equivalent experience and training.
D-4 LIMITED COOLING JOURNEYPERSON LICENSE
The holder of this license may perform the installation, repair, replacement, maintenance or alteration of all refrigeration systems included in food storage, air conditioning, or special process systems, and only while in the employ of a contractor licensed for such work. The requirements to qualify for this license examination shall be the completion of a registered apprenticeship program or equivalent experience and training.
G-1 LIMITED HEATING, PIPING, AND COOLING CONTRACTOR
The holder of this license may perform the installation, repair, replacement, alteration, and maintenance of gas piping systems and approved gas appliances, gas utilization equipment and accessories for use with LP gas supplied by gas containers and/or natural gas. The requirements to qualify for this license examination shall be two (2) years as a properly licensed journeyperson or equivalent experience and training.
G-2 LIMITED HEATING, PIPING, AND COOLING JOURNEYPERSON
The holder of this license may perform the installation, repair, replacement, alteration, and maintenance of gas piping systems and approved gas appliances, gas utilization equipment and accessories for use with LP gas supplied by gas containers and/or natural gas, and only while in the employ of a contractor licensed for such work. The requirements to qualify for this license examination shall be the completion of a registered apprenticeship program or equivalent experience and training.
OE-2 LIMITED OPERATING ENGINEER JOURNEYPERSON
The holder of this license may perform operation related work. “Operation” means a work discipline that employs technical knowledge and expertise in the manipulation, adjustment, control and monitoring of heating, air conditioning and refrigeration systems and boilers, with sufficient technical knowledge, as determined by the commissioner, and includes (i) heating systems with a steam or water boiler maximum operating pressure greater than fifteen pounds per square inch gauge, or air conditioning or refrigeration systems with an aggregate of more than fifty horsepower or kilowatt equivalency of fifty horsepower or of two hundred pounds of refrigerant. This license also permits incidental maintenance, directly on or adjacent to such operating equipment, including daily blow downs, sample and adjust chemical treatment, clean fuel filters, change fuel nozzle, clean strainers and changing of existing fuel types. Refrigeration plant operators may clean condenser water strainers, sample and adjust chemical treatment and perform absorber air purges. This license does not permit any replacement or revisions to existing piping of any system type. Such person may only perform such work while in the employ of properly licensed contractor or as an employee of a building owner for work on the premises owned or leased by such employer. The requirements to qualify for this examination shall be equivalent experience and training.
PP-1 LIMITED PROCESS PIPING CONTRACTOR LICENSE
The holder of the Process Piping contractor license (PP-1) may perform only work limited to and used directly in the production of a chemical or a product for human consumption. "Process piping" means piping or tubing that conveys liquid or gas that is used directly in the production of a chemical or a product for human consumption. The requirements to qualify for this license exam shall be two (2) years as a properly licensed journeyman or equivalent experience and training as determined by the Department.
PP-2 LIMITED PROCESS PIPING JOURNEYPERSON LICENSE
The holder of this license may perform work only while in the employ of a properly licensed contractor and only work limited and used directly in the production of a product for human consumption. "Process piping" means piping or tubing that conveys liquid or gas that is used directly in the production of a product for human consumption. The requirements to qualify for this license exam shall be the completion of a bona fide apprenticeship program or equivalent experience and training as determined by the Department.
S-1 UNLIMITED HEATING, PIPING, AND COOLING CONTRACTOR
The holder of this license may do all heating, piping and cooling work as defined in section 20-330 of the Connecticut General Statutes. The requirements to qualify for this license examination shall be two (2) years as a properly licensed journeyperson or equivalent experience and training.
S-2 UNLIMITED HEATING, PIPING, AND COOLING JOURNEYPERSON
The holder of this license may do all heating, piping and cooling work as so defined only while in the employ of a licensed contractor. The requirements to qualify for this license examination shall be the completion of a registered apprenticeship program or equivalent experience and training.
S-3 LIMITED HEATING, COOLING AND PIPING CONTRACTOR
The holder of this license may perform the installation, repair, replacement, maintenance or alteration of any apparatus of piping, appliances, devices or accessories for heating systems, boilers, including apparatus and piping for the generation or conveyance of steam and associated pumping equipment and oil burner installation and servicing (excluding sheet metal work, air conditioning and refrigeration systems). This license also covers the installation of hot, chilled and condenser water, as well as steam piping in air conditioning systems. The requirements to qualify for this license examination shall be two (2) years as a properly licensed journeyperson or equivalent experience and training.
S-4 LIMITED HEATING, COOLING, AND PIPING (JOURNEYPERSON)
The holder of this license may perform the installation, repair, replacement, maintenance or alteration of any apparatus for piping, appliances, devices or accessories for heating systems, boilers, including apparatus and piping for the generation or conveyance of steam and associated pumping equipment and oil burner installation and servicing (excluding sheet metal work, air conditioning and refrigeration systems) and only while ill the employ of a contractor licensed for such work. This license also covers the installation of hot, chilled and condenser water, as well as steam piping-in air conditioning systems. The requirements to qualify for this license examination shall be the completion of a registered apprenticeship program or equivalent experience and training.
S-7 LIMITED CONTRACTOR
The holder of this license may perform only work limited to hot water or steam heating systems for buildings not over three stories high with a total heating load not exceeding 500,000 BTU's and steam pressure not exceeding fifteen pounds. This license also covers the servicing and installation of oil burners handling up to five gallons per hour, as well as gas burners and gas piping for the work covered by this license. The requirements to qualify for this license examination shall be two (2) years as a properly licensed journeyperson or equivalent experience and training.
S-8 LIMITED JOURNEYPERSON
The holder of this license may perform only work limited to hot water or steam heating systems for buildings not over three stories high with a total heating load not exceeding 500,000 BTU’s and steam pressure not exceeding fifteen pounds and only while in the employ of a contractor licensed for such work. Also covered by this license is the servicing and installation of oil burners handling up to five gallons per hour, as well as gas burners and gas piping for work covered by this license. The requirements to qualify for this license examination shall be the completion of a registered apprenticeship program or equivalent experience and training.
S-9 LIMITED HEATING COOLING CONTRACTOR
The holder of this license may perform only work limited to hot water or steam heating systems for buildings not over three stories high with total heating load not exceeding 500,000 BTU's, steam pressure not exceeding fifteen pounds, and/or cooling installations up to 35 tons per systems. This license also covers the installation or servicing of oil burners handling up to five gallons per hour as well as LP gas supplied by gas containers and/or natural gas piping for work covered by this limited license. The requirements to qualify for this license examination shall be two (2) years as a properly licensed journeyperson or equivalent experience and training.
S-10 LIMITED HEATING COOLING JOURNEYPERSON
The holder of this license may perform work only while in the employ of a licensed contractor and only limited to hot water or steam heating systems for buildings not over three stories high with total heating load not exceeding 500,000 BTU's, steam pressure not exceeding fifteen pounds, and/or cooling installations up to 35 tons per systems. This license also covers the installation or servicing of oil burners handling up to five gallons per hour as well as LP gas supplied by gas containers and/or natural gas piping for work covered by this limited license. The requirements to qualify for this license examination shall be the completion of a registered apprenticeship program or equivalent experience and training.